How to use and maintain the fiber laser cutting machine? When using a fiber laser cutting machine to process objects, it is necessary to learn the use and maintenance skills of fiber laser cutting machine equipment, so as to better exert the effect of the equipment and maximize the working efficiency of the equipment.
How To Use And Maintain The Fiber Laser Cutter
- Check the steel belt frequently and make sure it is tight. Otherwise, there is a problem in operation, which may injure people, and even lead to death. The steel belt looks like a small thing, but the problem is still a bit serious.
- Check the straightness of the track and the verticality of the machine every six months, and timely maintain and debug if any abnormality is found. If this is not done, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is the most important and must be done.
- Use a vacuum cleaner to remove dust and dirt in the machine once a week, and all electrical cabinets should be closed to prevent dust.
- Each guide rail should be cleaned frequently to remove dust and other debris, to ensure that the normal rack of the equipment should be wiped frequently, and lubricating oil should be added to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved. .
- The dual focal length laser cutting head is a vulnerable item on the laser cutting machine. Long-term use will cause damage to the laser cutting head.
Fiber laser cutting machines need regular inspection and maintenance. If there is deformation or other forms, then you should know that the laser cutting head is a little damaged and needs to be replaced. Failure to replace it will affect the cutting quality and increase the cost. Some products may require secondary processing, reducing production efficiency. The laser cutting head should be produced by Huagong Farley, and it should be carefully checked when purchasing, so as to avoid problems when it is used at that time.