What kind of anti-rust oil should be used for automobile stamping parts?

What anti-rust oil should be used for automobile stamping parts? Depends on specific manufacturers, fabrication procedures, specific requirements! If the workpiece needs to be anti-rust during stamping, it is recommended that you use anti-rust stamping oil with anti-rust function! If the workpiece needs to be rust-proof after stamping, auto parts manufacturers recommend using special rust-proof oil at this time. The specific type of rust-proof oil can be determined according to the actual situation!

The stamping oil or stamping cleaning oil left in the stamping parts after fabrication will keep the rust prevention period of the stamping parts for 1-2 months. During this period, the stampings will be stored and repackaged at the general factory. At the same time, anti-rust treatment will be carried out. For example, the later packaging of automobile stamping parts is box-type packaging, and the internal auxiliary anti-rust film and other anti-rust methods can achieve a rust-proof period of about 1 year, which fully meets the requirements of transportation or storage.

After the workpiece is stamped, the anti-rust oil can be selected according to the following three points:

If your stamping parts are in stock and rust-proof for more than one year, it is recommended to choose a professional oil-film rust-proof oil at this time. Before packaging and storage, seal with anti-rust oil with good anti-rust effect to avoid rust.

If it is a stamping part that needs to be exported by sea in the later stage, it is recommended to choose some anti-rust oil that is resistant to salt spray, such as anti-rust oil that is resistant to salt spray

If your stamping parts need volatile oil, the oil film is thin, and the anti-rust time is half a year, you can choose to send anti-rust oil to prevent rust!