Pintejin specializes in custom sheet metal fabrication service and more. Advanced china engineering team and machinery is what sets us apart from our competitors.Contact us(via [email protected]) to learn more about our capabilities and how we can serve you.

What aspects should we pay attention to when cleaning car sheet metal parts?

After the car sheet metal parts are repaired or repaired, the next process is very important, that is, cleaning, do the cleaning work well, and the car body will look brand new. So how to clean it?

(1) Cleaning and assembly

Repairmen must remove welding slag and glue, and then clean the surface of the body. In particular, exposed metal surfaces must be sprayed with anti-corrosion materials. After the body restoration work is completed, it needs to be assembled. Assemble the trimmed body and local accessories, parts to be replaced and dismantled parts according to the requirements of the original car.

(2) Four-wheel alignment

Debug or test the vehicle, and be sure to perform four-wheel alignment for vehicles that have suffered a serious collision. To do four-wheel alignment is to use a four-wheel aligner to detect whether the inclination angle and beam value of each wheel of the vehicle meet the original standard. If not, it can be adjusted randomly. Only when the positioning data of the vehicle is accurate, the handling performance and stability of the vehicle can reach the best state, and the service life of the tire can be long. Through the four-wheel alignment inspection, if some data are found not to meet the specified standards, debugging should be carried out until all parameters are within the standard range. The supervisor should check the quality of the repair and then hand over the body for painting.

(3) Cleaning method

  • ① The cleaning of the inner ceiling should be meticulous. The cleaning method is usually to use a high-power vacuum cleaner and a brush to clean a large area, and then use a neutral detergent to focus on cleaning the dirt, and then perform a comprehensive cleaning.
  • ②The specific cleaning method is to first use a high-power vacuum cleaner to vacuum, and at the same time cooperate with the ceiling soft brush for preliminary cleaning. Then use a neutral foam cleaner to spray on the suede surface of the ceiling. Generally, a good quality foam cleaner will “hang” on the top for a long time. After a few minutes, use the special cleaning soft brush for the ceiling to gently clean it. Scrub, then use a damp towel to wipe.

Do not use other hard bristle brushes, otherwise the fluff will easily fall off. Use a foam cleaner for the suede ceiling, but you must buy the right one (preferably the dry one for washing fabric sofas, the one that will condense the dust into small beads after spraying). Then get it done with a vacuum cleaner. For stubborn stains, it is necessary to spray foam repeatedly for scrubbing. After cleaning, use another clean cotton cloth to smooth it in the direction of the fluff of the roof to restore it to its original appearance.

Automotive Sheet Metal Fabrication

Pintejin Sheet Metal shop offers a cost-effective solution for a wide range of industries with our custom metal stamping and custom sheet metal fabrication capabilities. Our stampnig operations include a variety of sheet-metal forming manufacturing processes, such as punching, blanking, embossing, bending, flanging, and coining. Our professional, experienced and well-trained engineers can execute the complex metal stamping operations with precision and accuracy.

No matter what your metal fabrication needs are, Pintejin can offer the right solution: from single sheet metal part or sub-assembly of stamped metal parts to turnkey solutions for mechanical and electrical assemblies. We have the technology, equipment and the experience to fabricate customised metal products from aluminium sheet metal fabrication, steel, zinc plated steel, stainless steel sheet metal fabrication, brass and copper. Designs that require CNC machining of surfaces or components can be accommodated. We can supply polished, galvanized, zinc coated or powder coated finishes for any sheet metal work or stamped metal components. Coupled with our accurate and reliable metal fabricating equipment, we guarantee precision and repeatability in custom sheet metal work. You’ll be taking advantage of the best sheet metal fabrication china can produce.

ABOUT US

With Pintejin automated and highly streamlined sheet metal fabrication service, you can expect a sheet metal fabrication quote within 12 hours and lead times as quickly as three days.Our rapid prototyping offering also includes a solid and reliable manufacturing capability (led by our expert team with 15+ years of experience) and technical and quality assurance, including SGS and RoHS material certifications, in-process quality reports, and First Article Inspection.

CONTACT US

EXTRA NAVIGATION

  • Automotive Sheet Metal
  • Electronic Sheet Metal
  • IPC Sheet Metal
  • LED Light Sheet Metal Parts
  • Laser Cutting China
  • Pintejin.com

Sheet Metal Fabricator
Logo