What are the maintenance points of power tools for automotive sheet metal fabrication?

The machinery and equipment processed by automobile sheet metal parts must first keep the appearance and interior clean, clean up the dust and some oil inside, and then apply lubricating oil to some connections and frequent movement places to prevent rust, and then add some Check whether the lubricating oil circulation system and work are normal, and then check whether the lighting system of the equipment can work normally, and check whether the control system is malfunctioning or damaged.

Check whether the fasteners are loose; check whether the air cooling system fails; check whether the brakes and safety mechanisms fail; check whether the joystick control torque fails; the above inspections are all necessary, and once the situation occurs, it will affect the mechanical The normal operation and operation are inconvenient, so once the above problems occur, we should make timely adjustments and maintenance.

Maintenance points of sheet metal fabrication power tools:

• 1. Protect the damaged power cord, and replace the severely damaged power supply with a new one;
• 2. Replace the damaged power plug with a new one;
• 3. Replace the brushes with excessive wear and poor contact;
• 4. Use high-pressure airflow to clean the dust inside the tool;
• 5. Check whether the card head, key and other accessories are seriously deformed. If it affects the use, replace it with a new one;
• 6. Wipe the tool clean;
• 7. Re-tighten the loose fasteners;
• 8. Check whether the manual switch is in good contact. If there is any problem, send it to the professional department for replacement.