Automobile stamping parts are processed by punching machines. In the whole process, the operation of lathe equipment is very critical. If it is not properly grasped, it will not only affect the forming quality of stamping parts, but also the equipment may be damaged. The key is the safety of the staff. There is no way to be guaranteed. Therefore, the operating requirements of lathe equipment during stamping parts fabrication will be brought to you soon.
First of all, when the lathe is punching, the operator must take corresponding protective measures; at the same time, the equipment must be comprehensively inspected, including the stability of each component, the working condition of the lathe, and the installation accuracy of parts and so on. If any problems are found during the inspection, they should be dealt with in time to avoid more serious consequences.
In addition, in the production process of stamping parts, in addition to the need to install active measuring equipment on the lathe, it is necessary to stop and measure the workpiece to ensure safety. The above mentioned items are all things that need to be paid attention to during fabrication, and are also for your safety.
Carefully observe the produced automotive stamping parts, and you will find that the surface of the product is uneven, which affects the quality of the entire workpiece. To improve this situation, we must first find the root cause of the problem, and then we can formulate relevant solutions in a targeted manner. Stamping parts manufacturers have also realized the seriousness of this problem, so they have begun to improve.
For the unevenness of the stamped gold surface, most of them are caused by impurities attached to the raw materials or stamping dies; or during the stamping process, the auto parts dies are collided; the height of the raw material conveyor belt is not properly adjusted; the deformation of the station equipment, etc. . These problems mentioned above may cause deformation and unevenness of stamping parts.
In addition to individual reasons, the combination will also deform the stamping parts. These concave and convex stamping parts need to be treated differently and cannot be used in automotive parts. If it is possible to repair it, it should be repaired in time. If the deformation is serious, it can only be discarded.
Pintejin Sheet Metal shop offers a cost-effective solution for a wide range of industries with our custom metal stamping and custom sheet metal fabrication capabilities. Our stampnig operations include a variety of sheet-metal forming manufacturing processes, such as punching, blanking, embossing, bending, flanging, and coining. Our professional, experienced and well-trained engineers can execute the complex metal stamping operations with precision and accuracy.
No matter what your metal fabrication needs are, Pintejin can offer the right solution: from single sheet metal part or sub-assembly of stamped metal parts to turnkey solutions for mechanical and electrical assemblies. We have the technology, equipment and the experience to fabricate customised metal products from aluminium sheet metal fabrication, steel, zinc plated steel, stainless steel sheet metal fabrication, brass and copper. Designs that require CNC machining of surfaces or components can be accommodated. We can supply polished, galvanized, zinc coated or powder coated finishes for any sheet metal work or stamped metal components. Coupled with our accurate and reliable metal fabricating equipment, we guarantee precision and repeatability in custom sheet metal work. You’ll be taking advantage of the best sheet metal fabrication china can produce.